Design No. FRP 159
FRP WALL SUPPORT EXTENSION LADDERS
- Sides: Made out of sides FRP channel of size 84x30mm.
- Steps: FRP 34mm round corrugated supported by aluminum tube.
- Fitted with non-slippery rubber pad on the lower and upper side.
- Fitted with Pulley, Rope for extend the ladder.
- Fold: Ladder will be two fold.
- FRP Steps: 32mm dia fiber corrugated tube sleeved on 25mm Aluminium corrugated tube as per IS: 733-1983 temper T-6.
Design No. FRP 151
FRP TELESCOPIC ECONOMICAL WHEELED TOWER LADDER
OPTION A
- Sides : Made out of sides FRP channel ‘[‘ of size 84x30mm.
- FRP Aluminium Steps: 26mm Aluminium corrugated square tube
- Pushing Handle, pulley, Rope will be provided.
- 2Nos wheel with screw brakes will be provided
- Platform & Safety ring
OPTION B
- Sides : Made out of sides FRP channel ‘[‘ of size 84x30mm.
- FRP Steps: 32mm dia fiber corrugated tube sleeved on 25mm Aluminium corrugated tube as per IS: 733-1983 temper T-6.
- Pushing Handle, pulley, Rope will be provided.
- 2Nos wheel with screw brakes will be provided
- Platform & Safety ring
Design No. FRP 156
FRP WALL SUPPORT SINGLE LADDERS
OPTION A
- Sides : Made out of sides FRP channel ‘[‘ of size 84x30mm.
- Steps : Aluminium 26mm square corrugated.
- Fitted with non-slippery rubber pad on the lower and upper side.
- Height : 15Ft Rates: @Rs.6375/-Each
OPTION B
- Sides : Made out of sides FRP channel ‘[‘ of size 84x30mm.
- FRP Steps: 32mm dia fiber corrugated tube sleeved on 25mm Aluminium corrugated tube as per IS: 733-1983 temper T-6.
- Pushing Handle, pulley, Rope will be provided.
- 2Nos wheel with screw brakes will be provided
- Platform & Safety ring
Design No. FRP 444
FRP TELESCOPIC TOWER LADDER
- Sides: Made out of FRP ‘channel’ shape section of size 84x30mm.
- Steps: FRP 32mm round corrugated supported by aluminium tube) of 25mm
- Cross: in aluminum ladder will be of Aluminium (scissor cross type).
- Platform size: 24” x 24” will be 3Ft. below from the top.
- Trolley: Made of MS Channel 100 x 50 mm
- Trolley size: 8Ft x 5 Ft.
- Winch: 1 No. Hand operated winch gear system will be provided
- Rope: 8mm Double Steel wire rope tested used.
- Wheels: 4 Nos. Hand cart wheel of size 12’’.
- Mounted on M.S Trolley.
Design No. FRP 152
FRP SELF SUPPORTING STOOL TYPE STEP LADDER
- Sides: Made out of FRP channel ‘C’ shape section of size 84x30mm.
- FRP Steps: 32mm dia fiber corrugated tube sleeved on 25mm Aluminium corrugated tube as per IS: 733-1983 temper T-6.
- Platform: 16” x 12” on top.
- Rubber shoes will be provided at bottom ends.